GreatWall Company

Vertical Compound CrusherHome >> Products >> Series of Crusher >> Vertical Compound Crusher

Vertical Compound Crusher

Vertical Compound Crusher

Vertical compound crusher is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210MPa and humidity less than 5%. E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite and sandstone etc.

(Click this button to inquiry)

  • Usage and Application
  • Working principle
  • Features
  • Main Specifications

The vertical compound crusher is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210MPa and humidity less than 5%. E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite, sandstone and so on. It is widely used in the industry of mining, metallurgy, building materials, fireproof materials, cement, coal, glass, chemical industry, electricity power and so on.

The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.

The machine has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost. The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time. 

It has the advantage of high crushing ratio, large output, high efficiency, and low consumption. It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine crushing equipment.

PFL-Ⅲ Series


Model

Inside Diameter of Cylinder
(mm)

Feeding Size
(mm)

Output Size
(mm)

Capacity
(t/h)

Motor
Power
(kw)

Weight
(t)

Overall Dimension
(mm)

PFL-750Ⅲ

750

<100

<5,90%

8-20

45

4

2370×1100×1300

PFL-1000Ⅲ

1000

<120

<5,90%

15-30

55

5.5

2680×1500×1400

PFL-1250Ⅲ

1250

<150

<5,90%

30-45

90

8.2

2970×1900×1900

PFL-1500Ⅲ

1500

<180

<5,90%

50-70

132

13.7

3400×2200×2100

PFL-1750Ⅲ

1750

<200

<5,90%

70-100

160

17.5

3800×2360×2200

PFL-2000Ⅲ

2000

<220

<5,90%

100-120

185

23

4590×2680×2300

PFL Series


Model

Inside Diameter of Cylinder
(mm)

Main Shaft Speed
(r/min)

Feeding Size
(mm)

Output
Size
(mm)

Capacity
(t/h)

Motor
Power
(kw)

Weight
(t)

Overall Dimension
(mm)

PFL-800

800

1100

<50

<5,90%

5-15

22

2.1

2000×900×1650

PFL-1000

1000

980

<80

<5,90%

10-25

45

3.2

2700×1150×1800

PFL-1250

1250

780

<120

<5,90%

20-40

75

4.2

2900×1350×1850

Note: Any Change of technical data shall not be advised additionally.

Inquiry

Contact Us

0086-371-63769782

0086-371-63769781

sales@greatwallcrusher.com