Products
Home Page >> SFP Super Fine Pulverizer SFP Super Fine Pulverizer
- SFP Super Fine Pulverizer
- SFP Super Fine Pulverizer
Usage and Application
This machine is mainly used in mine, building material, chemical, metallurgy and so on. It can grind the material whose hardness is less than 6 mohs scale, and moisture is less than 5%, such as Kaolin, limestone, talcum ,barite,calcite, marble, plaster, bentonite, graphite, paint and so on. And the finest size of product is 3500 mesh.
-
Note: Any Change of technical data will not inform additionally.型号 Feeding size
(mm)Product size
(mesh)Capacity
(kg/h)Main shaft speed
(R/min)Main machine
power
(kw)SFP-400
＜10
325-3500
150-500
3800
18.5
SFP-500
＜10
325-3500
200-600
3500
30
SFP-600
＜10
325-3500
250-700
3200
37
SFP-650
＜10
325-3500
280-800
3000
45
SFP-700
＜10
325-3500
350-1000
2900
55
SFP-800
＜10
325-3500
450-1500
2600
75
-
1. There are inner classifying and automatic slag-off device in this mill, which can discharge the hard and heavy material out off the mill in time, to protect the wearing parts, and improve the purity of the product at the same time.
2. With special grinding cavity and advanced classifying device to make sure the super fineness of the product.
3. For the material which has special demand for whiteness, such as kaolin, calcite and sierozem, this mill can get very fine product with high whiteness degree and without black dregs.
4. Comparing with other types of mills, this mill is with higher efficiency, less noise and dust pollution, , lower maintenance cost, and easier to operate and repair.